This guide specification for installation of interlocking concrete pavers in the U.S. using mechanical equipment.
Read MoreThis guide specification is for applications of concrete pavers adhered with a neoprene mastic to a bitumen-sand setting bed and tack coat over a concrete base.
Read MoreThis guide specification for the U.S. is for the construction of a new or rehabilitative overlay of concrete pavers and bedding sand over a concrete base for use in arterials and major thoroughfares.
Read MoreThis guide specification for is for the construction of a new or rehabilitative overlay of concrete pavers and bedding sand over existing asphalt, concrete, or aggregate base.
Read MoreThis guide specification is for applications of concrete pavers adhered with polymer adhesive onto a rigid base, typically cast-in-place concrete.
Read MoreThis item shall consist of a surface course composed of interlocking concrete pavers set in bedding sand on an approved base course constructed in accordance with the Plans and Specifications. All pavers shall be manufactured for the construction of paved surfaces to be trafficked by jet or propeller driven aircraft.
Read MoreThis guide specification is for pavers used as ballast and/or paving on pedestrian plaza roof deck applications with an aggregate setting bed over an optional drainage mat.
Read MoreThis guide specification is for concrete pavers mortared to a concrete base and grouted joints for exterior applications
Read MoreThis guide specification for concrete paver applications for concrete pavers and bedding sand over a compacted aggregate base for pedestrian and vehicular applications.
Read MoreThis guide specification is for concrete pavers on a sand bed with geotextile over a cement treated base (CTB).
Read MoreThis guide specification for the U.S. is for the installation of concrete tile paving units whose thickness are less than the minimum 2 3/8 in. (60 mm) required to conform to ASTM C 936.
Read More